Smartstud

Smartstud

Smartstud  LED road markers are an inductively powered on road lighting system which is Affordable, Durable and Versatile. There are two types of smartstud road markers, INDUCTIVE versions which can be either intelligent and passive and they have no direct wire connection as the cable sits just below the road surface or SOLAR versions.

There are many different applications that Smartstud can be used in.

  • Tunnel Guidance
  • Ports - Safety lighting and crossings
  • Traffic Flow
  • Dangerous Curves
  • Safety around Walkways & cycleways
  • Safety around Schools
Show:
Sort By:
We offer two inductive versions, intelligent and passive.Each Smartstud..
$0.00
The Tunnel Guidance Marker is inductively powered and has no direct wire connections, it is suitable for way finding, pedestrian footpath and emergency lighting.  ..
$0.00
The coring drill must have a 1-1/4..
$0.00
The LED coring bit is a 92mm diamond bit capable of drilling a hole to a depth of 40mm.. This bit has a standard 1 ..
$0.00
The 24V model power supply unit is an Intelligent power supply for inductive systems.  This power unit is capable of powering 100m of IPH cable and Capable of powering 30 IPH Nodes and LED markers.  ..
$0.00
 This power unit is capable of powering 2000m of IPH cable and Capable of powering 200 IPH nodes and LED road markers.    ..
$0.00
The two core IPH cable is made up of, plain annealed copper wire (PACW) conductors and special PE insulated (halogen free, non-flammable) unsheathed flat figure 8 cable. ..
$0.00
The IPH Node is a plastic cable separator at LED road marker locations.  Each marker requires a node separator between the cable to inductively couple power from cable to iiilevel..
$0.00
The IPL Node is a plastic cable separator used at Tunnel Guidance marker locations.  Each marker requires a node separator between the cable to inductively couple power from cable to the Tunnel Guidance LED Marker. ..
$0.00
Smart10.2 adhesive is a two-part fast cure polyurethane elastomer with strong adhesive properties for adhering plastics or other substrate to a bitumen or bitumen aggregate road surface. ..
$0.00
SmartBase is a two-part fast cure epoxy used to create a solid base for on road LED markers. SmartBase is suitable for asphalt and concrete surfaces.   ..
$0.00
The stud stamp is a plastic removable mould used to create an even impression in base epoxy before you install the LED road marker.   ..
$0.00